精密PCB製造、高頻PCB、高速PCB、標準PCB、多層PCB和PCB組裝。
PCB科技

PCB科技 - 柔性電路板衝壓輔助材料試驗方法

PCB科技

PCB科技 - 柔性電路板衝壓輔助材料試驗方法

柔性電路板衝壓輔助材料試驗方法

2021-10-10
View:427
Author:Aure

試驗方法 柔性電路板 pressing auxiliary 材料



Silicon aluminum foil auxiliary 材料 test:
Appearance inspection: smooth and clean surface, 無裂紋, 裂縫, 粒子, 泡沫, 針孔和雜質.
厚度:千分尺量測, 取五點量測, 讀取數據並記錄.
尺寸:用直尺或卷尺量測, 取兩條等邊量測, 讀取數據並記錄.
Temperature resistance: The silicon aluminum foil is continuously heated for temperature resistance test (temperature: 185°C; pre-pressing: 10S; molding time: 120S; pressure 100kg/cm2 for continuous operation for 5-7 days), 不允許存在脆性.
Silicone oil precipitation: the silicon-aluminum foil is continuously heated for temperature resistance test (temperature: 185 degree Celsius; pre-press: 10S; molding time: 120S; pressure 100kg/cm2 for continuous operation for 5-7 days), 不允許矽鋁箔矽油分離.


Glass fiber cloth auxiliary 材料 test:
Appearance inspection: The surface is smooth and clean, 沒有皺紋, 裂縫, 顆粒和雜質.
厚度:千分尺量測, 取五點量測, 讀取數據並記錄.
尺寸:用直尺或卷尺量測, 取兩條等邊量測, 讀取數據並記錄.
Temperature resistance: The glass fiber cloth is heated continuously for temperature resistance test (temperature: 185 degree Celsius; pre-pressing: 10S; molding time: 120S; pressure 100kg/cm2 for continuous operation for 5-7 days), 不允許存在脆性.



柔性電路板衝壓輔助材料試驗方法


Burned iron plate auxiliary 材料 test:
Appearance inspection: smooth and clean surface, 無裂紋, 裂縫, 粒子, 泡沫, 針孔和雜質.
厚度:千分尺量測, 取五點量測, 讀取數據並記錄.
尺寸:用直尺或卷尺量測, 取兩條等邊量測, 讀取數據並記錄.
Temperature resistance: The burnt iron plate is heated continuously for temperature resistance test (temperature: 185 degree Celsius; pre-compression: 10S; molding time: 120S; pressure 100kg/cm2 for continuous operation for 5-7 days), 不允許存在脆性.
Silicone oil precipitation: continuous heating of the burning iron plate for temperature resistance test (temperature: 185 degree Celsius; pre-compression: 10S; molding time: 120S; pressure 100kg/cm2 continuous operation for 5-7 days), 燒鐵板矽油不允許沉澱出來.


Green silica gel auxiliary 材料 test:
Appearance inspection: smooth and clean surface, 無裂紋, 裂縫, 粒子, 泡沫, 針孔和雜質.
厚度:千分尺量測, 取五點量測, 讀取數據並記錄.
尺寸:用直尺或卷尺量測, 取兩條等邊量測, 讀取數據並記錄.
Temperature resistance: The green silica gel is continuously heated for temperature resistance test (temperature: 185 degree Celsius; pre-pressing: 10S; molding time: 120S; pressure 100kg/cm2 for continuous operation for 5-7 days), 不允許存在脆性.
Silicone oil precipitation: continuous heating of the green silica gel for temperature resistance test (temperature: 185 degree Celsius; pre-compression: 10S; during molding
Room: 120S; pressure 100kg/cm2 continuous operation for 5-7 days), 不要讓綠色矽油沉澱.


TPX auxiliary 材料 test:
Appearance inspection: The surface is smooth and clean, 沒有皺紋, 裂縫, 顆粒和雜質.
厚度:千分尺量測, 取五點量測, 讀取數據並記錄.
尺寸:用直尺或卷尺量測, 取兩條等邊量測, 讀取數據並記錄.
Temperature resistance: TPX is continuously heated for temperature resistance test (temperature: 200°C; pre-pressure: 10S; molding time: 180S; pressure 120kg/cm2 for continuous operation 10-20 times), 不允許存在脆性.
Silicone oil precipitation: press the copper foil with the sample TPX (temperature: 180 degree Celsius; preheating time: 10S; molding time: 180S; pressure: 100kg/cm2), 連續按壓10-20次,然後進行預處理進行鍍鎳試驗, 鍍鎳後用10倍放大鏡觀察, 不允許接觸銅.


Auxiliary 材料 test of release film:
Appearance inspection: smooth and clean surface, 無裂紋, 裂縫, 粒子, 泡沫, 針孔和雜質.
厚度:千分尺量測, 取五點量測, 讀取數據並記錄.
尺寸:用直尺或卷尺量測, 取兩條等邊量測, 讀取數據並記錄.
Temperature resistance: The release film is continuously heated for temperature resistance test (temperature: 200°C; preload: 10S; molding time: 180S; pressure 120kg/cm2 for continuous operation for 5 to 10 times), 不允許存在脆性.
Silicone oil precipitation: press the copper foil with the sample delivery release film (temperature: 180 degree Celsius; preheating time: 10S; molding time: 180S; pressure: 100kg/cm2), 在預處理之前,連續按壓並粘合3到5次,進行鍍鎳試驗, 鍍鎳後用10倍放大鏡觀察, 不允許接觸銅.


High temperature resistant tape auxiliary 材料 test:
Appearance inspection: smooth and clean surface, 無裂紋, 裂縫, 粒子, 泡沫, 針孔和雜質.
厚度:千分尺量測, 取五點量測, 讀取數據並記錄.
尺寸:用直尺或卷尺量測, 取兩條等邊量測, 讀取數據並記錄.
Temperature resistance: The high temperature resistance tape is continuously heated for temperature resistance test (temperature: 200°C; pre-pressing: 10S; molding time: 180S; pressure 120kg/cm2 for continuous operation for 10-20 times), 不允許存在脆性.

iPCB是一種高精度, 優質PCB製造商, 例如:isola 370hr PCB, 高頻PCB, 高速PCB, 集成電路基板, 集成電路測試板, 阻抗印刷電路板, HDI PCB, 剛性-柔性PCB, 埋入式盲板, 高級PCB,微波PCB, telfon PCB和其他iPCB擅長PCB製造.