Language
Get quotes quickly.
sales@ipcb.com
2023-02-24
We have only analyzed some key characteristics of RO4350B. From the above analysis, we can see that RO4350B not only has good high frequency performance, low RF loss and other excellent electrical characteristics, but also has low production cost.
2023-02-21
High-frequency PCB design engineers generally select high-frequency PCB materials from the following aspects
2023-02-19
With the development of electronic technology. The production of electronic products also requires more and more materia...
2023-01-31
This paper expounds the characteristics of high frequency PCB and high speed PCB, and looks forward to the future development of high frequency PCB and high speed PCB.
2023-01-20
High-frequency circuit board refers to the special circuit board with high electromagnetic frequency, which is used in the fields of high frequency (frequency greater than 300MHZ or wavelength less than 1 meter) and microwave (frequency greater than 3GHz or wavelength less than 0.1 meter).
2022-10-17
PCB design and PCB manufacturing increasingly have a critical impact on product functions. As shown in the figure below, the conductors on a typical microwave RF PCB are all components.
2022-05-12
Combined with previous experience in choosing RT/duroid 6002 to build microwave multilayer PCB, the Arlon PCB of Rogers PCB can be used for multilayer bonding processing, and their quality and reliability are trusted.
In high-frequency multilayer PCB applications, the use of different Prepregs has different effects on the electrical properties of the material, and the material formulation used to bond high-frequency multilayer films may also vary widely.
2022-05-01
RT / Duroid 6010 laminate with aluminum base has the advantages of high dielectric constant, reducing circuit size and increasing heat dissipation efficiency with metal base. It is suitable for the design and application of airborne and ground high-power radar.
The low hygroscopicity of RT/duroid 6010LM microwave PCB material enables it to operate in high humidity environments without increased loss issues.
2021-12-31
The RF signal power output by the radio transmitter is transmitted to the antenna through the feeder (cable) and radiated by the antenna in the form of electromagnetic wave.
2021-12-27
Compared with other processes such as OSP and ENIG, ENEPIG PCB surface treatment process has the following advantages
2021-12-22
PCB board wiring is very important in the entire PCB circuit board design.
2021-12-21
In this article, we will discuss millimeter wave radar printed circuit boards from two aspects.
2021-11-29
As for microwave electronic products with higher frequencies, Teflon PCB are required (see the special article of the 50th issue of the Circuit Board Information Magazine for details).
2021-11-23
Copper-clad laminate is also known as base material. It is a plate-like material formed by hot pressing by impregnating ...
2021-11-18
The operating frequency of 5G will be much higher than that of 4G, forcing PCB designers to reconsider their PCB board d...
2021-11-15
In the design of high frequency PCB, engineers need to consider power noise, transmission line interference, coupling, electromagnetic interference (EMI) interference in four aspects.
2021-10-26
ipcb has a professional circuit board production team and domestic leading automated production equipment. PCB products ...
In double-layer circuit boards and multi-layer circuit boards, in order to connect the printed wires between the circuit...
