Microwave Tech - Sources of RF/Microwave Technical Blog page 9

2021-08-28

Crosstalk that should be considered when routing high-frequency circuit boardsEditor of pcb electronics factory: With th...

2021-08-28

Ⅰ、Inner lineAbout PCB Circuit Board,copper foil substrate is first cut to the size suitable for processing and productio...

2021-08-27

Product name: HDI rigid-flex boardBoard material: FR-4+PIBoard thickness: 0.15mm+1.2mmSurface technology: Immersion gold...

2021-08-27

Bonding sheet (prepreg) is one of the important materials in the manufacturing process of multilayer PCBs. Roge...

2021-08-27

At the same time, mobile IoT devices are becoming more and more, and wired power is not a long-term solution.

2021-08-27

In high-frequency pcb design, engineers need to consider four aspects of interference: power supply noise, transmission ...

2021-08-27

In reverse technology research PCB circuit board, a reverse schematic diagram refers to a circuit diagram drawn by the f...

2021-08-26

High density circuit board HDI expects to increase the density of the link, because this is considered appropriate a...

2021-08-26

This article mainly discusses the type of circuit process route. High-speed PCB circuit designers tend to use high-frequ...

2021-08-26

Multi-layer circuit boards are a special kind of printed circuit board, and its existence "place" is usu...

2021-08-26

High-frequency circuit boards are mainly equipped to handle high-frequency signals such as mixing, vibration, and ...

2021-08-26

What do you need to pay attention to when making high-frequency circuit boardsPcb manufacturer: As we all know, the ra...

2021-08-26

The definition of high-frequency board for circuit board production High-frequency board refers to the special ci...

2021-08-26

​The dielectric constant and loss factor of RO4835 and RO4350 are basically the same. The difference is that RO4835 is added with anti-oxidation filler on the basis of RO4350, and has passed the automotive safety test, which is suitable for automotive anti-collision radar antenna design.

2021-08-26

Difficulties in processing high-frequency microwave panelsBased on the physical and chemical properties of the PTFE ...

2021-08-26

Our country is in a favorable situation with economic construction as the center and reform and opening up. The a...

2021-08-26

High-Frequency Ceramic Substrate (also known as a ceramic circuit board) has the characteristics of high thermal conduct...

2021-08-26

In the high-frequency PCB board, one of the most important interference is power supply noise. Based on the systematic analysis of the characteristics and causes of power supply noise on high-frequency PCB board, and combined with engineering applications, some effective and simple solutions are put forward.

2021-08-25

Most thin-film passive devices in RF/Microwave circuit board are also based on the multilayer ceramic firing technique, ...

2021-08-25

The appearance of printed circuit board processing is one of the difficulties of printed circuit board processing, most of the printed circuit board is rectangular shape, but quite a lot of printed circuit board has a special appearance.