PCB Technical - Related PCB Technology Blog Posts page 177

2021-09-13

Generally speaking, in the PCB circuit board industry, RF circuit boards are considered to be any high-frequency PCB...

2021-09-13

I. Introduction With the continuous development of science and technology, especially information technology, the ...

2021-09-13

Everyone knows that high-frequency boards are high-frequency circuit boards used in the high-frequency field. I...

2021-09-13

What kind of material do we need to choose for high-frequency boards Generally, use FR-4 glass fiber board for freque...

2021-09-13

Fix some common defects in the circuit board immersion silver plating processSome problems may occur after the immersion...

2021-09-13

Analysis on the countermeasures to the deformation of the negative film in the process of copying the circuit boardIn th...

2021-09-13

The research on the mechanism of hole plugging in PCB printed circuit board and the introduction of the most effective c...

2021-09-13

A notable trend is the ever-increasing bandwidth requirements ofhigh-frequency electronic products and modern data trans...

2021-09-13

1.Vias are part of the printed circuit board (PCB) design. The function of vias is to electrically connect, fix and loca...

2021-09-13

De-drilling and etchback is an important process before the electroless copper plating or direct copper electroplating a...

2021-09-13

Electroless copper is a very important step in the metallization of printed circuit board holes. Its purpose is to form ...

2021-09-13

There are several treatment processes for the surface of the circuit board: bare board (no treatment on the surface), ro...

2021-09-13

PCB is one of the important parts of the electronics industry. Almost every kind of electronic equipment needs pcb, as l...

2021-09-13

In the schematic diagram of a pcb digital circuit, the propagation of a digital signal is from one logic gate to another...

2021-09-13

Teach you four-layer PCB copy board methodPCB factory: The four-layer PCB copy board is a PCB board whose components hav...

2021-09-13

Method of optimizing the defect rate of PCB for automotiveIn today's key PCB applications, automotive PCB boards occ...

2021-09-13

Four main methods of electroplating in circuit boardsThere are four main electroplating methods in circuit boards: finge...

2021-09-13

Prevent PCB board bending and board warping when passing through the reflow furnaceEveryone knows how to prevent PCB ben...

2021-09-13

What are the methods to prevent PCB board warpage?1. Why the circuit board is required to be very flatIn the automated...

2021-09-13

1 Heat dissipation through the PCB board itselfAt present, the widely used PCB boards are copper-clad/epoxy glass cloth ...