PCB Technical - The difference between lead spray tin and lead-free tin spray on PCB board?

The difference between lead spray tin and lead-free tin spray on PCB board?
Process requirements in circuit board production are a very important factor, which directly determines the quality and positioning of a board.

For example, spraying tin and immersion gold, relatively speaking, immersion gold is a high-end board. Immersion gold is relatively high relative to cost due to its good quality.

Therefore, many customers choose the most commonly used tin spraying process. Many people know the tin spraying process, but they don't know that tin can be divided into lead tin and lead-free tin.

Today, I will tell you in detail the difference between lead-tin and lead-free tin for your reference.
1. From the surface of tin, lead-tin is brighter, and lead-free tin (SAC) is relatively dim. The wettability of lead-free is slightly worse than that of lead-free.

2. Lead in lead is harmful to the human body, but lead-free is not. The leaded eutectic temperature is lower than that of lead-free. How much depends on the composition of the lead-free alloy,

The eutectic of SNAGCU is 217 degrees, and the welding temperature is the eutectic temperature plus 30~50 degrees. It depends on actual adjustments. The leaded eutectic is 183 degrees. Lead is better than lead-free in mechanical strength and brightness.

3. The lead content of lead-free tin does not exceed 0.5, and the lead content reaches 37.

4. Lead will increase the activity of tin wire during the soldering process. Lead-tin wire is better than lead-free tin wire, but lead is toxic, and long-term use is not good for the human body, and lead-free tin will have a higher melting point than lead-tin. In this way, the solder joints are much stronger.

What is the difference between lead-free and lead-free spray tin on PCB board? What is the temperature?
1. PCB board lead-free tin spraying belongs to the environmental protection category and does not contain harmful substances "lead", the melting point is about 218 degrees; the temperature of the tin spraying furnace needs to be controlled at 280-300 degrees; the peak temperature needs to be controlled at about 260 degrees; over. The temperature is 260-270 degrees.

2. The PCB board with lead and tin spray does not belong to the environmental protection category. It contains harmful substances "lead", with a melting point of about 183 degrees; the temperature of the tin spray furnace needs to be controlled at 245-260 degrees; the peak temperature needs to be controlled at about 250 degrees; over. Temperature 245-255 degrees
Our factory is located in China. For decades, Shenzhen has been known as the world's electronics R&D and manufacturing center. Our factory and website are approved by the Chinese government, so you can skip the middlemen and buy products on our website with confidence. Because we are a direct factory, this is the reason why 100% of our old customers continue to purchase on iPCB.
No minimum requirements
You can order as little as 1 PCB from us. We will not force you to buy things you really don't need to save money.
Free DFM
Before you pay in the most timely manner, all your orders will receive free engineering document review services by our well-trained professional and technical personnel.