Microwave Tech - Some basic requirements for the design of high frequency microwave radio frequency board pads

Pad type: On the printed circuit board, the electrical connections of all components are carried out through pads. The pad is the most important basic unit in the design of the PCB circuit board (high-frequency board/microwave radio frequency board). According to different components and soldering processes, the pads in the printed circuit board can be divided into two types: non-via pads and via pads. Non-via pads are mainly used for soldering surface mount components, and via pads are mainly used for soldering pin-type components.
The choice of the pad shape of the high-frequency board/microwave radio-frequency board is related to the shape, size, layout, heating and force direction of the components, and the designer needs to make a selection after comprehensive consideration according to the situation. In most PCB circuit board design tools, the system can provide designers with different types of pads such as round pads, rectangular pads and octagonal pads.
1. Round pad
In printed circuit boards (high frequency boards/microwave radio frequency boards), circular pads are the most commonly used pads. For high-frequency microwave radio frequency boards, the main dimensions of the circular pad are the aperture size and the pad size. There is a proportional relationship between the pad size and the aperture size. For example, the pad size is generally twice the aperture size. . Non-via circular pads are mainly used as test pads, positioning pads and reference pads, etc. The main size is the pad size.

2. Octagonal pad
Octagonal pads are relatively rarely used in printed circuit boards (high-frequency microwave radio frequency boards). They are mainly set to meet the requirements of printed circuit board wiring and pad soldering performance at the same time.
3. Shaped pad
In the PCB (high frequency board/microwave radio frequency board) design process, the designer can also use some special-shaped pads according to the specific requirements of the design. For example, for some pads with large heat generation, large force, large current, etc., they can be designed into a teardrop shape.
4. Rectangular pad
Rectangular pads include square pads and rectangular pads. The square pad is mainly used to identify the first pin used to install components on the printed circuit board. Rectangular pads are mainly used as pin pads for surface mount components. The size of the pad is related to the size of the corresponding component pin, and the pad size of different components is different. For the specific dimensions of some component pads, please refer to section 1.3.
Land size
The pad size has a great influence on the manufacturability and life of SMT products. There are many factors that affect the size of the pad. When designing the pad size, the range and tolerance of the component size, the need for the size of the solder joint, the accuracy, stability and process capabilities of the substrate (such as positioning and placement accuracy) should be considered when designing the pad size. The size of the pad is specifically determined by factors such as the shape and size of the components, the type and quality of the substrate, the capacity of the assembly equipment, the type and capacity of the process used, and the required quality level or standard.
The size of the designed pad, including the size of the pad itself, the size of the solder resist or the size of the solder mask frame, the design needs to consider the footprint of the component, the wiring under the component and the dispensing (in the wave soldering process) Process requirements such as dummy pads or wiring.
At present, when designing the pad size, it is not possible to find a specific and effective comprehensive mathematical formula, so users must also cooperate with calculations and experiments to optimize their own specifications, instead of using others' specifications or calculated results. Users should establish their own design files and develop a set of size specifications suitable for their actual conditions.

Users need to understand many aspects of information when designing pads, including the following parts.

1. It is necessary to have a detailed understanding of the quality (such as size and temperature stability) of the PCB (high frequency board/microwave radio frequency board) substrate, materials, mimeograph process capabilities and relative suppliers, and it is necessary to organize and establish its own substrate specifications.

2. Although there are international specifications for the packaging and thermal characteristics of components, the specifications differ greatly in some respects for different countries, different regions and different manufacturers. Therefore, the selection of components must be restricted or the design specifications must be divided into levels.

3. It is necessary to understand (high frequency board/microwave radio frequency board) product manufacturing process and equipment capabilities, such as the size range of substrate processing, placement accuracy, screen printing accuracy, dispensing process, etc. Understanding this aspect will be of great help to the design of the pad.