Language
Get quotes quickly.
sales@ipcb.com
2021-11-06
First, the purpose:Better control of SMT workshop materials, reduce material loss during use, thereby reducing workshop ...
Purpose: to ensure the standardization of the use and printing of SMT solder paste, provide direct and clear guidance fo...
Purpose: In order to maintain a good production order in the SMT workshop, improve the overall image of the workshop and...
The uneven printing of solder paste and the amount of solder paste will cause Manhattan (tombstone) phenomenon. Too litt...
Purpose: In order to maintain a good production order in the SMT workshop, improve the quality and efficiency of the pro...
The following is an introduction to the management system of SMT workshop transfer linePurpose
1. Handover of printing station:1.1 During the handover, the shift personnel must check the number of PCB boards on the ...
In order to maintain a good production order and production environment in the SMT workshop, improve production efficien...
1. Brief introduction of printing machineTin brushing is a very important link in the entire SMT process. This link incl...
1. Purpose: Used to guide the reflow soldering temperature curve test operation instructions.2. Scope of application: su...
One, the solution to the solder ball produced by SMT reflow soldering(1) The principle of solder ball formation in reflo...
In the process of SMT hot air reflow soldering, the solder paste needs to go through the following stages, the solvent v...
2021-11-05
The factors of SMT material loss, we can first make a detailed analysis through the man-machine material method as follo...
1.0 PurposeStandardize the purchase, storage, use, and recycling of solder paste in the SMT workshop to avoid the scrap ...
SMT patch production line1. Missing (solder paste without placed footprint)—Missing (solder paste without placed footpri...
a. In the PCB printing process, due to the offset between the template and the pad, the solder paste flows out of the pa...
The following is an introduction to the notices for PE engineers of SMT processing plants:1. What are the characteristic...
1.1 Current status of the workshopThe workshop on the first floor of the production center has a length of 44 meters, a ...
This specification specifies the shape of the SMT steel mesh, the steel mesh logo, the materials used to make the steel ...
