PCB News - Relevant operating rules for PCBA processing

Relevant operating rules for PCBA processing
The Internet era has broken the traditional marketing model, and a large number of resources have been gathered together to the greatest extent through the Internet, which has also accelerated the development speed of FPC flexible circuit boards, and then as the development speed accelerates, environmental problems will continue to appear in PCB factories. In front of you. However, with the development of the Internet, environmental protection and environmental informatization have also been developed by leaps and bounds. Environmental information data centers and green electronic procurement are gradually being applied to the actual production and operation fields.
PCBA is made on the empty PCB board through SMT, and then through the production process of DIP plug-in. It will involve a lot of fine and complicated process and some sensitive components. If the operation is not standardized, it will cause process defects or components. Damage, affecting product quality and increasing processing costs. Therefore, in PCBA processing, it is necessary to abide by the relevant operating rules and operate in strict accordance with the requirements.
Operation rules of PCBA processing:
1. There should not be any food or drink in the PCBA work area, smoking is prohibited, no sundries unrelated to work should be placed, and the workbench should be kept clean and tidy.

2. The soldered surface of the PCBA patch cannot be taken with bare hands or fingers, because the grease secreted by human hands will reduce solderability and easily lead to soldering defects.
3. The operation steps for PCBA and components are reduced to a minimum to prevent danger. In assembly areas where gloves must be used, soiled gloves will cause contamination, so gloves must be replaced frequently when necessary.
4. Do not use skin-protecting oils to coat hands or various silicone-containing detergents, as they can cause problems in solderability and adhesion of conformal coatings. A specially formulated detergent for PCBA soldering surface is available.
5. Components and PCBA that are sensitive to EOS/ESD must be marked with appropriate EOS/ESD marks to avoid confusion with other components. In addition, in order to prevent ESD and EOS from endangering sensitive components, all operations, assembly and testing must be completed on a workbench that can control static electricity.
6. Regularly check EOS/ESD workbenches to confirm that they can work normally (anti-static). The various dangers of EOS/ESD components can be caused by incorrect grounding methods or oxides in the ground connection parts. Therefore, special protection should be given to the "third line" grounding terminal joints.
7. It is forbidden to stack PCBA, otherwise physical damage will occur. There should be dedicated various brackets on the assembly work surface, and they should be placed according to the type.
Regarding the operating rules of PCBA processing, I have introduced it here today. InPCBA patch processing, these operating rules should be strictly followed and the correct operation can ensure the final use quality of the product, reduce component damage and reduce costs. To learn more, you can continue to view or follow the news of this site