Precision PCB Fabrication, High-Frequency PCB, High-Speed PCB, Standard PCB, Multilayer PCB and PCB Assembly.
The most reliable PCB & PCBA custom service factory.
PCB News

PCB News - PCB factory: DIP plug-in station allocation and its work content

PCB News

PCB News - PCB factory: DIP plug-in station allocation and its work content

PCB factory: DIP plug-in station allocation and its work content

2021-09-28
View:633
Author:Aure

PCB factory: DIP plug-in station allocation and its work content



DIP (Double In-line Package) is double case in-line assembly. It is a circuit assembly technology in which through-hole components are placed on the front of the PCB, and the component pins pass through the PCB, and are soldered and assembled by wave soldering and other methods. .





The process of DIP is simply the process of plug-in welding. According to the process, its workstations can be divided into plug-in, pre-furnace inspection, repair welding, foot trimming, cleaning, post-furnace inspection and auxiliary workstations. In order to let everyone know how to better manage the DIP work and improve the production efficiency and quality of the DIP assembly line, I will discuss with you about the working position and work rules.



PCB factory: DIP plug-in station allocation and its work content

DIP station allocation and work content:


DIP station allocation and work content DIP work criteria


Ten principles of DIP plug-in:


1. Use the same method to make PCB boards: The production method and plug-in sequence of each PCB board are exactly the same.

2. If there is no special order, the two stations can only have one PCB board at most.

3. Except for the first and last stations, employees of other stations should keep a PCB board on hand at any time.

4. Unless otherwise specified, make one product at a time.

5. The working hours of each PCB board is less than 2 minutes.

6. Enclose the installation in turn from top left to bottom right.

7. After finishing the parts in a single position, use your fingers to count.

8. The classification of polar parts: the polar parts are divided into two categories (up/left) and (down/right) according to their polarity, and they are plugged in by different personnel to avoid reverse polarity insertion.

9. Count first, insert later: For small and large parts, set 5 as a group, count first, insert, and insert the last part in the last position.

10. Work station certification: Employees cannot work on their posts before they have passed the training.

iPCB is a high-tech manufacturing enterprise focusing on the development and production of high-precision PCBs. iPCB is happy to be your business partner. Our business goal is to become the most professional prototyping PCB manufacturer in the world. Mainly focus on microwave high frequency PCB, high frequency mixed pressure, ultra-high multi-layer IC testing, from 1+ to 6+ HDI, Anylayer HDI, IC Substrate, IC test board, rigid flexible PCB, ordinary multi-layer FR4 PCB, etc. Products are widely used in industry 4.0, communications, industrial control, digital, power, computers, automobiles, medical, aerospace, instrumentation, Internet of Things and other fields.