PCB Technical - How to choose a PCB factory that meets your needs?

Many PCB proofing provides high-quality PCB boards at low prices. In any case, if your choice is not the best, there may be many small things that may cause some inconvenience. Of course, the main source of checkout is the Internet. Customer feedback may be a good starting point for evaluating the PCB manufacturing process of the selected supplier. Other resources worth checking include social media, colleague suggestions, or other influences. Sometimes it is not wrong to try to mass produce any manufacturer and evaluate the PCB board manufacturing process and improve the quality yourself. Different people may have different experiences, and things that are bad for one person may be right for others.

Evaluate the quality of the PCB delivered. If you decide to try a new PCB manufacturer, you may need to check some key points when receiving the board. Most of them are PCB quality inspections. You may encounter several aspects, such as:

Circuit board size-in line with the standard

Hole-correct size, accurate positioning and centering

Cutting quality-check whether the edge of the board is cut correctly

Silkscreen-small parts that are highly readable and visible

Welding layer-accurate and correct

Has connectivity been tested? -Most manufacturers have already implemented it.

These small basic issues may affect the choice of PCB manufacturers. The key to PCB quality is the successful construction of electronic equipment.

Pay attention to the manufacturer's requirements when designing PCB

Before building a new PCB board, it is best to check the conditions of the selected manufacturer. They usually specify the minimum and maximum dimensions of PCB components, such as holes, traces, dimensions, voids, etc. If they determine the smallest possible size, it does not mean that you should try to compress it to the smallest size. If the size is small, there is always a risk of increased failure. Use the common sense that comes with the exercise.

Other factors for choosing the right PCB manufacturer

manufacturing cost. In some cases, this may be an important factor, but competitor PCB manufacturers will keep prices close to each other. Other factors may be more important, such as the schedule-the time required to manufacture the PCB. If you need a rapid development board, then this is essential. Of course, then following delivery can sometimes be frustrating. Make sure to check the possible shipping methods and prices. Other factors may be bonuses, such as the number of boards included in the order, discounts, coupons, etc.

Generally, you should find a PCB manufacturer that suits your needs. If not, please try to adapt the manufacturer's functions to your needs. Choosing the right manufacturer is an important step in the successful assembly and production of electronic devices. The time it takes to select a PCB manufacturer is reasonable and may be an important factor in the long run. If you are planning a large number of PCBs, it is worth visiting the company and understanding the entire process of manufacturing high-quality circuit boards.