PCB Technical - Technology of battery FPC shape and hole processing

1. FPC shape and hole processing technology of flexible circuit board

   
   

At present, the most used batch processing of FPC is punching, and small batch battery FPC and FPC samples are mainly processed by CNC drilling and milling. These technologies are difficult to meet the future requirements for dimensional accuracy, especially position accuracy standards, and now new processing technologies are gradually being applied, such as laser etching, plasma etching, chemical etching and other technologies. These new shape processing technologies have very high position accuracy, especially the chemical etching method not only has high position accuracy, but also has high mass production efficiency and low process cost. However, these techniques are rarely used alone, and are generally used in combination with the punching method.

The purpose of use is classified into FPC contour processing, FPC drilling, battery FPC slot processing and related parts trimming. The simple shape and accuracy requirements are not high, all are processed by one-time punching. For substrates with particularly high precision and complex shapes, if the processing efficiency does not necessarily meet the requirements with a pair of molds, the battery FPC can be processed in several steps. A specific example is the plug part of a narrow-pitch connector. And positioning holes for high-density mounting components.

2, flexible circuit board FPC guide hole

is also called positioning hole. Generally, the processing of the hole is an independent process, but there must be a guide hole for positioning with the line pattern. The automated process uses a CCD camera to directly identify positioning marks for positioning, but this kind of equipment is expensive and has a limited scope of application, so it is generally not used. Now the most used method is to drill positioning holes based on the positioning marks on the copper foil of the flexible printed board. Although this is not a new technology, it can significantly improve the accuracy and production efficiency. In order to improve the precision of punching, the positioning hole is processed by the punching method with high precision and less debris.

3, flexible circuit board FPC punching

Punching is the use of pre-prepared special molds to process holes and shapes on a hydraulic press or crank press. Nowadays, there are many kinds of molds, and molds are sometimes used in other processes.

4, flexible circuit board FPC milling processing

The processing time of milling processing is in seconds, which is very short and the cost is low. The production of molds is not only expensive but also requires a certain cycle, which makes it difficult to adapt to the trial production and design changes of urgent parts. If the numerical control data of the numerical control milling processing is provided together with the CAD data, the operation can be carried out immediately. The length of the milling processing time of each workpiece directly affects the level of processing cost, and the processing cost is also high for a long time, so the integrated adjustment processing is suitable for products with high price and low quantity or short trial production time.