Rogers RO4350B Microwave RF Printed Circuit Board

Rogers RO4350B is a hydrocarbon / ceramic laminate with a dielectric constant of 3.48. It meets the requirements of commercial equipment manufacturers for printed circuit boards.

RO4350B is a patented hydrocarbon resin system / ceramic filler reinforced by woven glass cloth. Its electrical properties are very close to PTFE / woven glass cloth material, and its machinability is similar to that of epoxy resin / glass cloth material.

RO4350B can use the standard epoxy / glass cloth processing technology, while providing strictly controlled permittivity and loss at a fraction of the price of traditional microwave materials. There is no need for special through-hole pretreatment or operation procedures like PTFE based microwave materials.

RO4350B material has passed UL 94V-0 fire rating for active equipment and high voltage RF design.

It has the following advantages:

1. Low RF loss

2. Low dielectric constant fluctuation with temperature

3. Low z-axis thermal expansion coefficient

4. Coefficient of expansion in low plate

5. Low permittivity tolerance

6. Stable electrical characteristics at different frequencies

7. Easy to mass production and multi-layer mixing of FR4, with high cost performance

Typical applications

Cellular base station antenna and power amplifier, Microwave point to point connection (P2P), Automotive radar and sensors, Radio frequency identification (RFID) tags,LNB for live satellite

For more technical information about RO4350B, please visit: Rogers RO4350B Technical Specifications

Rogers RO4350B Technical Specifications

RF/Microwave PCB material:

Rogers RO4350B / RO3003 / RO4003 / RO3006 / RT/Duroid 5880 / RT5870 and etc.

Arlon / Isola / Taconic / PTFE F4BM / Teflon material also shouldn’t be forgotten.

Hybrid PCB material (Mixed dielectric / Laminate)

Rogers RO4350B + FR4 / RO4350B + IT180 / RO4003C + FR4 / RO3010 + FR4 / RO3003 + FR4 / RO3010 + FR4 etc.

Radio Frequency (RF) microwave PCB application

RF Microwaves PCBs (printed circuit board) are used in various of fields, Such as Consumer Electronics / Military/Space / High power / Medical / Automotive / Industrial ect.

Surface finishing: OSP / ENIG / HASL LF / Plated gold / flash gold / Immersion Tin /Immersion silver/ Electrolytic gold

Capacity: Golden finger / Heavy copper / Blind buried via / impendance control / filled with resion / carbon ink / backdrill / countersink / depth drilling / half plated hole / pressfit hole / peelable blue mask / peelable solderstop / thick copper / oversize

Material: Rogers RO4350B / RO3003 / RO4003 / RO3006 / RT/Duroid 5880 / RT5870 and Arlon / Isola / Taconic / PTFE F4BM / Teflon material etc.

Layer: 2L 4L 6L 8L 10L 12L 14L 16L 18L 20L 22L 24L 26L 28L 30L

Dielectric Constant (DK): 2.20 / 2.55 / 3.00 / 3.38 / 3.48 / 3.50 / 3.6 / 6.15 / 10.2