PCBA Tech - SMT placement machine operation and machine failure

The SMT machine has been widely used in industrial production in recent decades. It can glue and place parts. High efficiency is the key and the most complicated in the production of all SMT equipment. However, the laying process of this machine is too complicated and requires us to You explain the specific operation method of the paving machine, now let us explain the operation method of the paving machine carefully for everyone

1. Inspection machine, SMT machine is a kind of intelligent machine, it will help us save some of the latest updated data, so we need to check the SMT machine system before using the machine, the first is the hardware air source, power supply and The emergency button is normal, covering the safety cover of the laying machine, the suction nozzle is damaged or offset, the interior and the paper machine are cleaned, and then we check the software, the program and see if it needs to be done.

2. Recovery operation: For the operation of the patch machine software, we first need to check the software, open the system, and then select "return to machine origin" in the menu, so that our patch machine will automatically return to the origin and wait for the next operation

3. Warm-up operation: The hot operation can help the machine "quickly burn", which is a function we must enable before assembly, so that the assembly machine can quickly enter the state, thereby making the assembly more accurate and faster. Usually, we can set the heating time to 10-15 minutes, and then perform the installation task after the waiting time is over.

4. Placement production: Placement production task is one of the most important tasks in our entire system. We need to inspect and process products through machines.

5. Production data: After the installation is completed, we can carry out production data. Press the F2 key on the keyboard to select the production data to be produced. Once selected, the nozzle type of each main device required to display the data on the operation screen will be determined one by one.

Most of the time, we are prone to many errors in the operation and use of SMT machines. This not only reduces our production efficiency, but also affects the production process, avoiding thousands of kinds. We let the invention show you some common Errors, this will lead to many incorrect placement machines, we must correctly avoid these failures, which will make our machines work better, please let us take a look.

One: If it is in place when setting the material, it is wrong. We need to accurately calibrate the working position. Because there are many machines in the puller, the position is incorrect. If there is a problem, paste one of the common skew phenomena., We must correct it immediately, and every time we use the placement machine, we must check it.

two. 2: If we want to use our method on the SMT machine to change the operation of materials, it will not only affect the operation of the machine, the failure of the paving machine, but also threaten our lives, the emergency replacement of materials and the emergency brake of the machine, To ensure personal safety

Third: When SMT is working, we cannot insert our body deeply into SMT. If you need to observe the operation, you must close the security window and look outside the window. If an accident occurs, we must shut it down in an emergency.

Four: There is something wrong with our SMT machine. SMT often likes the inspection effect. This is a good operation. However, many bad PCBA factories find defective materials after inspection and perform secondary processing, which is not only the same in material. This is a great loss, and it also misleads consumers, we reject poor quality.