PCB News - Why does the PCB board snake-shaped routing and what is it used for?

Why does the PCB board snake-shaped routing and what is it used for?

Printed circuit boards {Printed circuit boards}, also known as printed circuit boards, are providers of electrical connections for electronic components.

Printed circuit boards are often represented by "PCB", but cannot be called "PCB boards".

The equal line length of the high-speed digital PCB board is to keep the delay difference of each signal within a range to ensure the validity of the data read by the system in the same cycle (when the delay difference exceeds one clock cycle, the next cycle will be read incorrectly. Data), generally requires that the delay difference does not exceed 1/4 clock cycle, and the line delay difference per unit length is also fixed. The delay is related to the line width, line length, copper thickness, and layer structure, but too long a line will increase the distributed capacitance And distributed inductance, so that the signal quality, so the clock IC pins are generally connected to RC termination, but the serpentine trace does not play the role of inductance, on the contrary, the inductance will make the higher harmonic phase shift in the rising element of the signal, Resulting in deterioration of signal quality, so the serpentine line spacing is required to be at least twice the line width, the smaller the signal rise time, the more susceptible to distributed capacitance and distributed inductance.

Because different applications have different functions, if the serpentine trace appears in the computer board, it mainly acts as a filter inductor to improve the anti-interference ability of the circuit. The serpentine trace in the computer motherboard is mainly used in Some clock signals, such as CIClk and AGPClk, have two functions: 1. Impedance matching 2. Filtering inductance.

For some important signals, such as the HUBLink in the INTELHUB architecture, there are 13 in total, running at 233MHz. The length must be strictly equal to eliminate the hidden dangers caused by time lag. Winding is the only solution. Generally speaking, the line spacing of serpentine traces is >=2 times the line width. The snake line on the PCI board is to meet the line length requirements of the PCI33MHzClock. If it is a distributed parameter LC filter in a general ordinary PCB board, it can also be used as the inductance coil of the radio antenna, and the short and narrow serpentine trace can be used as a fuse and so on.

iPCB is a high-tech manufacturing enterprise focusing on the development and production of high-precision PCBs. iPCB is happy to be your business partner. Our business goal is to become the most professional prototyping PCB manufacturer in the world. Mainly focus on microwave high frequency PCB, high frequency mixed pressure, ultra-high multi-layer IC testing, from 1+ to 6+ HDI, Anylayer HDI, IC Substrate, IC test board, rigid flexible PCB, ordinary multi-layer FR4 PCB, etc. Products are widely used in industry 4.0, communications, industrial control, digital, power, computers, automobiles, medical, aerospace, instrumentation, Internet of Things and other fields.