Công nghệ PCB - Phiên bản hoàn chỉnh tiến trình sản xuất PCB

Phiên bản hoàn chỉnh tiến trình sản xuất PCB

Hôm nay mang đến cho bạn một phiên bản hoàn chỉnh PCB quá trình sản xuất, Tôi hy vọng anh có thể hiểu rõ hơn về... PCB sản xuất!

PCB--Cut Lamination

Objective: according to the requirements of the engineering data MTôi, the large sheet meeting the requirements is cut into small pieces of production sheet and small pieces to meet the requirements of customers

Tiến: large board cutting according to MI requirements

PCB--Drill hole

Objective: according to the engineering data, drill the required hole diameter at the corresponding position on the plate with the required size

Process: lamination - put on board - drilling - put off board - inspection / sửa

PCB--PTH

Objective: to deposit a thin layer of copper on the wall of insulating hole by chemical method

Process: rough grinding - hanging plate - automatic copper sinking line - lower plate - dilute H2SO4 - increase copper

PCB--Dry film

Objective: graphic transfer is to transfer the image on the production phim cho hội đồng

Process: (solder mask process): board grinding - printing the first side - drying - printing the second side - drying - exposure - developing - inspection（ Dry film process: pressing film - standing - alignment - exposure - standing - developing - inspection）

PCB--Etching

Objective: etching is to use chemical reaction method to remove the copper layer of non circuit parts

PCB--Solder mask

Objective: solder mask is to transfer the graphics of green ink, film to the board, so as to protect the circuit and prevent the tin on the circuit when welding parts

Process: grinding plate - printing photosensitive green oil - curium plate - exposure - development; board grinding - printing the first side - drying plate - printing the second side - drying plate

PCB--Silk screen

Objective: silk screen is a kind of mark which is easy to identify

Process: solder mask after final curium - cooling and standing - screen adjustment - character printing - back curium

PCB--Surface treament

Objective: to coat a nickel / Lớp bằng vàng với độ dày cần thiết trên ngón trỏ, so as to make it have more hardness and wear resistance

Process: grinding board - degreasing - twice water washing - micro erosion - twice water washing - pickling - copper plating - water washing - nickel board - washing - gold plating

PCB--Outline

Objective: through the mold stamping or CNC chiêng machine gongs out of the customer needs the shape forming method, hữu cơ, Bảng bia, gongs, hand cut

Note: the accuracy of data gong machine board and beer board is higher than that of hand Gong, chỉ có thể tạo ra những hình dạng đơn giản

PCB--Test

Objective: to detect the open circuit, short circuit and other defects that are difficult to find by visual inspection

Process: mold loading - board setting - test - qualified - FQC visual inspection - unqualified - repair - return to test - OK - reject - scrap

PCB--Final inspection

Objective: through 100% visual inspection of plate appearance defects, và sửa chữa lỗi nhỏ, to avoid problems and defective plate outflow

Specific work process: incoming materials - check data - visual inspection - qualified - FQA spot check - qualified - packaging - unqualified - treatment - check -OK

So, trên đây là toàn bộ tiến trình về PCB, nếu bạn có đề xuất nào khác, Comment được chào đón để giao tiếp với bạn.

Tiến trình PCB